Projecting Image Files In A Folder In Sequence (Slideshow) - Epson EB-435W User Manual

Slideshow
b
Press the [ ], [ ], [ ], and [ ] buttons to select the image file
you want to project.
c
Press the [ ] button.
The image is displayed.
a
Press the [ ][ ] buttons to move to the next or previous
image file.
d
Press the [Esc] button to return to the file list screen.

Projecting image files in a folder in sequence (Slideshow)

You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Use the following procedure to run
Slideshow.
a
To change files automatically when you run Slideshow, set Screen
Switching Time from Option in Slideshow to anything other than No.
The default setting is 3 seconds.
a
Start Slideshow.
The file list screen is displayed.
"Starting Slideshow"
s
b
Use the [ ], [ ], [ ], and [ ] buttons to position the cursor
over the folder for the Slideshow that you want to run, and then
press the [ ] button.
c
Select Slideshow at the bottom right of the file list screen, and
then press the [ ] button.
Slideshow starts, and the image files in the folder are automatically
projected in sequence, one at a time.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On in the Option
window, projection starts again from the beginning when it reaches
the end.
"Image file display settings and Slideshow operation settings"
s
p.107
You can proceed to the next screen, return to the previous screen, or
stop playback while projecting a Slideshow.
p.103
106