Lenovo ThinkStation E32 User Manual page 55

7. Slide the new card reader with retainer into the card reader drive bay until it snaps into position.
Figure 25. Installing the card reader
8. Connect the card reader cable to the front USB connector 2 on the system board. See "Locating
parts on the system board" on page 12.
9. Locate the protective cover for the card reader drive bay on the front bezel. Remove the protective
cover by pressing the small tab
cover from the front bezel.
Figure 26. Removing the card reader cover
10. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 33.
1 to the left and then pulling the tab to completely disengage the
.
Chapter 5 Installing or replacing hardware
43