Sharpening Knives; Customer Service/Warranty - Hamilton Beach Open Ease Can Openers Use & Care Manual

840097800 ENv01.qxd 2/28/02 10:37 AM Page 6

Sharpening Knives

1. Place cutting edge of knife in the
knife slot located on the back of
the can opener.
2. Draw the knife blade through the
slot several times.
NOTE: Serrated blades should never
be inserted into this unit.
Hints for Best Use
• The can opener will easily open all standard size cans.
• On some models it will be necessary to position can opener
at edge of counter, allowing for clearance to open cans
taller than the can opener.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
6
Cleaning Your Can Opener
1. Unplug cord from electrical outlet.
2. To remove the piercing lever, push
lever up and pull out.
3. Wash the piercing lever in hot,
soapy water. Rinse and dry
thoroughly. Do not place in
dishwasher.
4. Wipe the body of can opener
with damp cloth. NEVER im-
merse the can opener in water.
5. To assemble, place the knob
on the back of piercing lever
into keyhole with the lever pointing
toward the ceiling. Rotate the lever
clockwise until it locks into place.

Customer Service/Warranty

If you have a question about your can opener, call our
toll-free customer service number. Before calling, please
note the model, type, and series numbers and fill in that
information below. These numbers can be found on the
bottom of your can opener. This information will help us
answer your question much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
Remove
Assemble
7