Using The Stopwatch - Sanyo KATANA LX User Manual

5.
Select Repeat field to set a repeat status for the alarm
and press .
Highlight ,
Once Daily
press .
6.
Select Alarm field to turn the alarm on or off and
press .
Select or and press
On Off
7.
Press Save (left softkey) to save the alarm settings.
Tip Press the left softkey ( On or Off ) to toggle the alarm
on and off.
To change the alarm settings, press Settings (right
softkey) to set the ringer length and snooze options.
To stop the alarm:
Press any key. (The alarm will stop and then sound
again after the selected snooze interval.)
Press (right softkey) to dismiss the event.
Dismiss
, , or and
Mon – Fri Sat and Sun
.

Using the Stopwatch

To start the stopwatch:
Press > Tools > Stopwatch
Press (left softkey) to start the stopwatch.
Start
Press (left softkey) to stop the stopwatch.
Stop
Press (left softkey) to restart the stopwatch.
Resume
To record a lap time while the stopwatch is running:
Press (right softkey) to record the first lap time.
Lap
Press (right softkey) again to record the next lap.
Lap
(Up to five lap times can be displayed. If you continue
recording, lap times will be deleted starting with the
oldest.)
To display the stopwatch options:
1. From the stopwatch display, press
softkey).
2. Select an option and press
to display a saved Lap List. Select
Go to Lap List
(left softkey) to display the Lap List detail.
Detail
to save the recorded lap times (not
Save to LapList
available when no lap time is saved).
to reset the time to zero and clear any
Reset
recorded lap times.
Section 2G. Calendar and Tools
.
(right
Options
.
81