Using The Stopwatch; Using The Countdown Timer - Sanyo SCP-M1 User Manual

Using the Stopwatch

To start the stopwatch:
Select
Press Start (left softkey) to start the stopwatch operation.
Press Stop (left softkey) to stop the stopwatch operation.
Press Resume (left softkey) to start the stopwatch operation
again.
To record a lap time while the stopwatch is running:
Press Lap (right softkey) to record time of the first lap.
Press Lap (right softkey) again to record the next lap. (Up to
5 lap times can be displayed. If you continue recording, lap
times will be deleted from the oldest.)
To display the stopwatch options:
From the stopwatch display, press Options (right softkey).
Go to Lap List to display a saved Lap List. Press Detail (left
softkey) to display the lap list detail or press Options (right
softkey) for further options.
Edit Title to edit the current Lap List's title.
Erase This to erase an individual Lap List.
Erase All to erase all existing Lap Lists.
Save to Lap List to save the recorded lap times.
Reset to reset the time to zero and clear any recorded lap
times.

Using the Countdown Timer

To use the countdown timer:
1.
Select
2.
Select a number, press
Description to enter a description of the countdown (up to
14 characters).
Time to enter the countdown time.
Alarm to set the countdown alarm on or off.
3. Press Save (left softkey) to save the countdown settings.
> Tools > More Tools > Stop Watch.
> Tools > More Tools > Countdown.
, and then enter the following items.
8. Personal Organiser 83