Battery Capacity; Removing The Battery; Installing The Battery - Sanyo KATANA LX User Manual

Hide thumbs Also See for KATANA LX:
Table of Contents

Advertisement

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 4.8 hours of
continuous digital talk time.
When there are approximately two minutes of talk time
left, the phone sounds an audible alert and then
turns off.
Note
Long backlight settings, searching for service,
vibrate mode, browser use, and other variables may
reduce the battery's talk and standby times.
Tip
Watch your phone's battery level indicator and
charge the battery before it runs out of power.

Installing the Battery

1.
Insert the battery into the opening in the back of the
phone, making sure the connectors align (1). Gently
press down to secure the battery (2).
2.
Replace the battery cover and slide it upward until
you hear a click (3).
1
2

Removing the Battery

1.
Make sure the power is off so that you don't lose any
stored numbers or messages.
2.
Press the battery release latch (1) and slide the
battery cover downward and remove it (2).
3.
Lift up the battery and remove it from the phone (3).
WARNING
Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
1
2
Section 2A. Phone Basics
3
3
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sprint katana lx

Table of Contents