Advertisement
1
INSTALL TRIM
When finished tiling the wall, remove PLASTER GUARD (3).
Push on CAP (1).
Mount ESCUTCHEON (2) and with SCREWS (7).
Install HANDLE (8) by pushing it onto CARTRIDGE STEM (9)
and tightening SET SCREW (10) from below with 2.5mm
Hex Wrench supplied. Insert INDEX BUTTON (11).
Remove cap from tub supply and plug from shower pipe.
Install SHOWER ARM (4) and FLANGE (13). Install
SHOWER HEAD (5). See Step 2.
Tighten SET SCREW (12) onto FLANGE (13)
using 5/64" hex wrench.
Install DIVERTER SPOUT (6).
2
INSTALL SHOWER HEAD ASSEMBLY
REMOVE SHOWER HEAD FROM HOUSING
Hold SHOWERHEAD (1) with one hand and HOUSING (2)
with the other as illustrated.
Rotate SHOWERHEAD (1) clockwise while holding HOUSING (2)
stationary. NOTE: The thread connection is a left hand
thread. Keep turning SHOWERHEAD (1) until it can be
removed from the HOUSING (2).
2a
INSTALL HOUSING
Slide HOUSING (2) onto
SHOWER ARM (3).
2c
INSTALL HOUSING TO SHOWER HEAD
Install HOUSING (2) onto SHOWER HEAD (1). Thread
HOUSING (2) counter-clockwise to install onto SHOWER
HEAD (1). Hand tighten only.
1-1/2" REF.
2b
3
2
13
12
9
1
INSTALL SHOWER HEAD
Rap SHOWER ARM (3) threads with Teflon tape.
Tighten SHOWERHEAD (1)
with an adjustable wrench.
Do not over tighten.
TEFLON TAPE
1
1
3
4
5
2
7
8
10
11
6
2
1
3
2
M 9 6 8 6 9 0
Advertisement
