JBL Soundfly Air Quick Setup Manual page 6

2. Unplug Soundfly Air from the wall outlet and remove its grille as
shown below.
3. Connect your iPod, iPhone or iPad to Soundfly Air's USB port.
4. Plug Soundfly Air back into the wall outlet and wait until the power
LED illuminates solid white.
5. Launch the Soundfly Air app on your iPod, iPhone or iPad, and select
"Easy Setup."
6
6. Follow the prompts in the app to complete the Wi-Fi setup.
7. Remove Soundfly Air from the wall outlet, remove the USB cable
from Soundfly Air and replace the grille as shown below.
8. Plug Soundfly Air back into the wall outlet. After the power LED
illuminates solid white the Wi-Fi LED should illuminate solid green to
indicate that Soundfly Air is joined with your Wi-Fi network.
NOTE: The JBL Soundfly App also allows you to change the EQ setting
to get the best sound wherever you plug in Soundfly Air.