Using Your Espresso Pronto For The First Time; Cleaning The Internal System; Preparing Espresso - Krups ESPRESSO PRONTO 988 Instruction Book

Using your
Espresso Pronto
for the first time
I
We recommend that you
get familiar with all the
parts of your "Espresso
Pronto" before operating
the machine. Insert the fil-
ter holder into the machine,
and remove and replace
water reservoir. Wipe off
the steam nozzle and Per-
fect Froth attachment with
a damp cloth to make sure
all dust particles from
transport are removed.
Wash all loose parts in
warm, soapy water, rinse
thoroughly and dry.
When using your "Espresso
Pronto" for the first time we
recommend running water
through the machine to
remove any dust particles
which may have settled
during shipping..
Make sure before you start
that the removable overfl~
grid (g) is properly in place
and that the drip tray (h) is
properly inserted.
Before plugging the appli-
ance. into an electrical out-
let. make sure that the con-
trol dial (c) is in the "0"
position and the On/OFF
switch (I) is in the "OFF"
position.
1
J
~
Cleaning The
Internal System
Step 1
. Open the water chamber
lid and remove the water
reservoir (see figure 1).
This allows you to con-
veniently bring the water
reservoir to the faucet.
. Fill the water container
~
with fresh. cold water just
below the hinge of the
handle (see figure 2).
. Insert the water contai-
ner back into the
appliance (see figure 3).
Make sure that it sits in
properly so the valve on
the base of the water
reservoir is activated.
The front view water level
indicator tells you how
~much water you have
added (see figure 4).
. Insert filter holder with
either the one or two cup
filter basket. Do this by
raising the filter holder
up into the machine at a
45 degree angle (see
figure 5). Turn the filter
holder to the right until it
is in the center of the
machine. This will lock
the filter holder into
.place. Now you are
ready to warm up your
"Espresso Pronto".
Step 2
. Place a cappuccino cup
that has at least a 5 oz.
capacity underneath the
filter holder spout
(see figure 6).
. Turn the "On/Off" s'
to "'" ON. The two ii
cator lights, both ye
and red, will illumin
As soon as the yell(
(thermostat) light g(
out, the machine is
ted up and ready te
. Turn the control dial
the" a "position al
allow cup of water Ie
through the machinE
Repeat this process
half the water in the
water container has
emptied (see figure
THIS WILL REQUIR
YOU TO STAY Win
THE MACHINE TO
EMPTY EACH CUP
BECOMES FULL. U
COMPLETION OF E
CUP RETURN TO TI
"0" POSITION!
Preparing. .
Espresso"
Step 1
. Fill the water contair
with fresh, cold watE
(see figure 1-3).
While making espre~
water can be added
the reservoir by opel
the hinged water Chi
ber lid and adding VI
to the water reservoi
using another recep'
to fill the container.