Optional Installation - Tripp Lite SMART1500RMXL2UA Owner's Manual

Optional Installation

These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
serial cable (see
communication port on your computer to the
communication port of your UPS. Install on
your computer the Tripp Lite PowerAlert
Software appropriate to your computer's
operating system.
EPO Port Connection
2
This optional feature is only for those
applications which require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
Using the cable provided, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
201205186-93-3148.indb 7
) or DB9
1A
) to connect the
1B
) to a user-supplied
2A
).
2B
7
USB
1A
USB
1B
USB
2A
2B
Model: SMART1500RMXL2UA
RS232
Model: SMART1500RMXL2UA
Model: SMART1500RM
RS232
4-5
6/19/2012 1:15:06 PM