KitchenAid KESS907SBL00 Installation Instructions Manual page 6

Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
Freestanding Range Slide-in Range
B
\
\
B F
H
G
A
A. 4" (10.2 cm) rain. clearance
from both sides of range to
side wall or other combustible
material
B. !8" (45.7 cm) upper cabinet to
countertop
C. !3" (33 cm) upper cabinet
depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE _.
F. 30" (76.2 cm) min. opening
width
G. Junction box - 8" (20.3 cm)
to 22" (55.9 cm) from either
cabinet, 7" (!7.8 cm) max.
from floor
H. Cabinet door or hinge should
not extend into the cutout.
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other
combustible material
B. 18" (45.7 cm) upper cabinet
to countertop
C. 13" (33 cm) upper cabinet
depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE*
F. 223/4``(57.8 cm) opening depth
G. 30" (76.2 cm) min. opening
width
H. V4" (6.2 cm) radius both comers
I. Junction box - 8" (20.3 cm) to
22" (55.9 cm) from either
cabinet, 7" (!7.8 cm) max. from
floor
J. Cabinet door or hinge should
not extend into cutout.
NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the cooktop surface.