Advertisement
Available languages
Available languages
l Remove
the short screws
edges
)rill through
these holes
Customer-supplied
panel
Install 2 long screws supplied in top corners to secure custom
wood panel in place.
top
edges
Remove
2 short screw
Customer-supplied
and replace
with
long
panel
screws
provided.
Remove the short screws (3rd from top) on either side of the
inner door panel. Predrill 2 pilot holes using a 3/32"drill bit. Use
tape to mark the drill bit to gauge the hole depth. Drill pilot
holes approximately
11/2 '' (3.8 cm) using the door liner hole as a
guide into the panel. Install the 2 remaining
long screws.
4
Advertisement
