Kenmore 11029832801 Installation Instructions Manual page 5

1.
2.
3.
Straight power cord
Remove power plug and yellow strap from machine base
to release the rear beveling system.
I
Firmly grasp the power cord and pull to completely remove
the power cord, cord restraint, and pin from the rear panel.
Confirm that the power cord restraint (A) and pin (B)
are removed.
Looped power cord
1.
2.
Looped power cord
Firmly grasp the yellow shipping strap and pull until both ends
are completely removed from washer.
U
Check that two (2) cotter pins were removed with the shipping
strap.
A. Power cord restraint
B. Pin