Kenmore 11029832801 Installation Instructions Manual page 2

iNSTALLATiON REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Parts supplied:
A B C
A. Beaded tie strap
B. Front leveling feet with nuts (2)
C. Drain hose form
D. Water inlet hoses (2)
E. Flat water inlet hose washers (4)
Tools needed for installation:
Alternate Parts
Your installation may require additional parts. Parts listed are
available from your local Sears store or Sears Service Center. For
further information, catl 1=800=4=MY=HOME ® {1=800=469=4663).
If You Have:
You Will Need to Buy:
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)
1" (2.5 cm) 11A" (3.2 cm) diameter to 1" (2.5 cm)
diameter diameter standpipe adapter,
standpipe Part Number 280130
Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump, and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets 2 longer water fill hoses:
beyond reach of fill 6 ft (1.8 m) Part Number 76314,
hoses 10 ft (3.0 m) Part Number 350008
Drain hose Kit Part Number 280131
too short
Lint clogged drain Drain protector, Part Number 367031
I Adjustable or open end
wrench %6" (14 mm)
Level
Wood block
Ruler or measuring tape
Pliers that open to 1,%6"
(3.95 cm)
Flashlight (optional)
2