Sony S312 White Paper page 40

Feature
Factory pre-configuration
OTA
Security mechanism
Bearer
OTA via SMS
Interface
Bearer
OTA via SMS
OTA via Cell Broadcast
Re-provisioning Interface
OTA via SMS
OTA via Cell Broadcast
Carrier reset/provisioning
SWIM
Applicative provisioning
Preferred bearer customization
Email customization
Other applications/features
Technologies
OMA Client provisioning
Openwave OTA
Provisioning bearer
Parameter sets available
Parameter sets for OTA
modification
PUSH
Content types
Service Indication (SI)
Support for WAP
CSD (possibility to lock a setting), GPRS
CSD, GPRS configuration possible
OMA Client Provisioning
Uses security mechanism (SEC) methods according to WAP-183-
ProvCont-20010724-a (see www.openmobilealliance.org)
OMA Client Provisioning
For NETWPIN the user is asked to accept to install received
settings. For USERPIN, USERNETWPIN and USERPINMAC the
user is subsequently asked to enter a PIN code that is a shared
secret between the service provider and the user
-
OMA Client Provisioning
If the settings previously installed were privileged or have higher
priority, the settings might not be possible to install again unless
the terminal is reset, otherwise as above
J
Yes, but not if the set is pre-configured in the factory and locked
Not used for provisioning. The SWIM is only used for WAP
security, both SSI/TLS connections and digital signatures
Yes
Yes, but not through provisioning
Yes (MMS, SyncML, Wireless Village)
Yes, WAP provisioning document v1.1
No
SMS
< or = 10 (total number of Internet profiles)
< or = 65535 (total number of Internet profiles)
Yes
40
White paper
-
-
September 2009
S312