Wavetek 3SR Operation Manual page 121

Message ERROR... The selected reference has been
corrupted!
Condition
Response
Message SORRY... Not enough sweeps have occurred to store
an accurate reference. Please allow more time in
SWEEP.
Condition
Response
Message ERROR... A system error has occurred!
Condition
Response
Message ERROR... There is no response from the printer!
Condition
Response
Message SORRY... There is nothing to print! Please select a
measurement mode before attempting to print.
Condition
Response
Message WARNING... A sweep file with this name already
exists. Overwrite?
Condition
Response
The reference cannot be used
because of a non-volatile
memory failure.
Delete the corrupted reference and
select another.
An attempt to store a reference
without sufficient sweeps.
Allow more time in Sweep Mode.
A system error has been detected.
Restart the unit and try again.
The printer is not responding to the
unit.
Check printer connection and
compatibility.
An attempt to print was made
without being in a measurement
mode.
Choose a measurement mode.
A sweep file with the same name
currently exists.
Overwrite or choose another name.
B-3