Using Dual Watch; Weather Channel Frequency - Radio Shack 5W Owner's Manual

appears. The transceiver pauses on
each active channel. Press
/ to change the scan direction.
SKIP
Press any key other than
/ to stop scanning.
SKIP
Press
QUIET/Q-SCAN
weather radio to mute.
The transceiver alerts you when it
detects a weather emergency
broadcast, so you do not have to
continuously listen to the weather
broadcasts. When the weather alert
signal is received,
alert tone sounds. Press
again to return the weather radio
SCAN
to standby.
Notes:
• When the weather radio is muted
and a second weather alert is
detected, the radio does not beep,
$/7 $/7 $/7 $/7
but appears and the weather
broadcast resumes.
• When the weather radio is on,
squelch is automatically turned on
and does not adjust the
SQL
squelch.
/ or
/ or
to set the
appears.
$/7 $/7
$/7 $/7
appears and the
QUIET/Q-

Weather Channel Frequency

Channel
1
2
3
4
5
6
7
8
9
10

USING DUAL WATCH

You can set the transceiver to monitor
the DW (Dual Watch) channel and one
operation channel, or one operation
channel and one weather channel.
To set the DW channel :
Press / or
desired channel, then hold down
'8$/ '8$/ '8$/ '8$/
until appears.
Notes:
• The default DW channel is
channel 0 (emergency channel).
• You cannot set a weather channel
as the DW channel.
9
Frequency (MHz)
162.400
162.425
162.450
162.475
162.500
162.525
162.550
161.650
161.775
163.275
/ to select the
SKIP
DUAL