Setting The Key Tone; Using Key Lock; Using Apo/Hi/Lo - Radio Shack 5W Owner's Manual

To monitor the DW channel and one
operation channel:
1. Press / or
second channel.
2. Press .
DUAL
transceiver checks the two
channels alternately, and their
numbers alternately appear.
When a signal is received on
either channel, the transceiver
stops on the active channel until
the signal disappears. After a few
seconds of inactivity, dual watch
mode resumes.
3. Press any key to stop dual watch.
To monitor one operation channel and
one weather channel:
1. Press / or
an operation channel.
2. Press to turn on the weather
WX
:; :; :; :;
radio. appears.
3. Press / or
weather channel.
4. Press .
DUAL
transceiver checks the two
channels alternately, and their
numbers alternately appear.
When a weather alert signal is
received, the transceiver exits
dual watch mode to receive the
broadcast.
Note: To return to dual watch,
press .
DUAL
/ to select a
SKIP
'8$/ '8$/
'8$/ '8$/
appears. The
/ to select
SKIP
/ to select a
SKIP
'8$/ '8$/ '8$/ '8$/
appears. The
When a signal is received on the
operation channel, the transceiver
stops on the active channel until
the signal disappears. After a few
seconds of inactivity, dual watch
mode resumes.
5. Press any key to stop dual watch.

SETTING THE KEY TONE

Hold down
MON/FUNC
to set the key tone beep to on or off.
appears when the key tone is on.
Note: The key tone does not beep
when you press
, even if the key tone is on.
FUNC

USING APO/HI/LO

Press
APO/HI/LO
power to high for long distance
transmissions, or low for short distance
transmissions.
Note: You cannot set the transmitting
power when the weather radio is on.
When Auto Power Off is on, the
transceiver automatically turns off
when it is idle for 2 hours. Press any
key to turn the transceiver back on. To
turn the Auto Power Off function on or
off, hold down
$3 21 $3 21
$3 21 $3 21
.
APO/HI/LO
briefly.

USING KEY LOCK

You can lock the
,
DUAL APO/HI/LO
10
then press
or
LOCK/PTT MON/
to set the transmitting
+, +, +, +, /2 /2 /2 /2
or appears.
then press
MON/FUNC
$3 2) $3 2)
$3 2) $3 2)
or appears
/ , /
SKIP
, and
QUIET/Q-SCAN
/
, ,
WX