Table of Contents
Advertisement
end of the charger into a standard
AC outlet.
When
appears, recharge the
battery pack.
To detach the battery pack, push up
the arrow key on the side of the
transceiver, then slide the battery pack
away from the arrow key.
CONNECTING THE
ANTENNA
Align the slots around
the antenna's connector
with the tabs on the
antenna jack. Press the
antenna down over the
jack and turn the
antenna's base
clockwise until it locks
into place.
USING THE
BELT CLIP
the belt clip down onto the plastic tab.
To detach the belt clip, lift up the tab
and slide off the clip.
The supplied
belt clip lets you
easily attach the
transceiver to
your belt.
To attach the
belt clip, slide
Using an External Speaker/
Microphone
An external speaker/microphone lets
you use the transceiver while it is
clipped to your belt, without lifting it to
your mouth to transmit. Lift up the
rubber cover on the
jacks. Connect an optional speaker/
microphone with a
1
and a
/
inch plug to the
8
jacks on the side of the transceiver.
This automatically disconnects the
transceiver's built-in speaker and
microphone.
CONNECTING AN
EARPHONE/EXTERNAL
SPEAKER
To listen privately (or to hear more
clearly in a noisy area such as a
warehouse) you can connect an
earphone or an external speaker. Lift
the rubber cover off the
jacks on the side of the transceiver,
then plug an optional earphone or
external speaker with a
into the
jack. This automatically
SPK
disconnects the built-in speaker.
Listening Safely
To protect your hearing, follow these
guidelines when you use an earphone.
• Set the volume to the lowest
setting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
5
and
MIC
SPK
3
/
inch mini-plug
32
and
MIC
SPK
and
MIC
SPK
1
/
inch plug
8
Hide quick links:
Advertisement
Table of Contents
