Connecting The Antenna - Radio Shack TRC-237 Owner's Manual

21-1650.fm Page 15 Thursday, August 5, 1999 11:43 AM
Note: If the TRC-237 does not operate
when you use the DC fused cord, turn the
power supply off, unplug the cord from the
power supply's power socket, then clean
any debris from the socket. If your TRC-
237 still does not work, check the fuse in
the DC fused cord and replace it if neces-
sary.
CONNECTING THE
ANTENNA
Caution: To prevent damage to your
TRC-237, you must connect an antenna
before you operate it.
Follow these steps to attach the supplied
flexible antenna to your TRC-237.
1. Align the slots around the antenna's
connector with the tabs on the
antenna jack on top of the TRC-237.
2. Press the antenna down over the
jack and turn the antenna's base
clockwise until it locks into place.
To remove the antenna, turn the anten-
na's base counterclockwise until it un-
locks, then lift it off the antenna jack.
15