Table of Contents
Advertisement
To install DVD-ROM device driver in the host computer to operate this DVD-ROM drive,
refer to the instruction manual of each DVD-ROM device driver.
1) Turn on the SYSTEM, including the DVD-ROM drive.
2) Press the OPEN/CLOSE button of the DVD-ROM drive to open the disc tray.
3) Place the disc in the center of the disc tray, label side up as shown on the
following page.
4) To close the disc tray, press the OPEN/CLOSE button on the DVD-ROM drive
or push lightly on the center of the front of the disc tray as shown below. The
disc tray will automatically close the rest of the way.
5) Follow the instruction manual of DVD-ROM device driver.
Audio connecting cable
Power supply cable
Interface cable
Software Installation
Drive Operation
GD-2500 DVD-ROM Manual 11
Advertisement
Table of Contents
