Drive Operation - Hitachi GD-2000 Installation Manual

GD-2000 Manual 6/18/98 5:25 PM
To install DVD-ROM device driver in the host computer to operate this DVD-ROM
drive, refer to the instruction manual of each DVD-ROM device driver.
1) Turn on the SYSTEM, including the DVD-ROM drive.
2) Press the OPEN/CLOSE button of the DVD-ROM drive to open the disc tray.
3) Place the disc in the center of the disc tray, label side up as shown on the
following page.
4) To close the disc tray, press the OPEN/CLOSE button on the DVD-ROM drive
or push lightly on the center of the front of the disc tray as shown below. The
disc tray will automatically close the rest of the way.
5) Operate referring to the instruction manual of DVD-ROM device driver.
Page 11
Audio connecting cable
Power supply cable
Interface cable
Software Installation

Drive Operation

GD-2000 DVD-ROM Manual - Page