Maintenance - Hitachi B16RM Instruction Manual And Safety Instructions

MAINTENANCE

MAINTAINING YOUR DRILL PRESS
WARNING
For your own safety, turn the switch "OFF" and remove
the plug from the power source outlet before maintaining
or lubricating your drill press.
Frequently blow out, using an air compressor or dust
vacuum, any dust that accumulates inside the motor.
A coat of automotive paste wax applied to the table and
column will help to keep the surface clean & help to avoid
rust.
To avoid shock or fire hazard, if the power cord is worn or
cut in any way, have it replaced immediately.
LUBRICATION
All of the drill press ball bearings are packed with grease
at the factory. They require no further lubrication.
Periodically lubricate the gear and rack for table elevation,
and the mechanism of the spindle the rack (teeth) of the
quill.
—20 —