Initial Settings - Hitachi HDC-1491EP Instruction Manual

Initial Settings

Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the batteries for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the MODE button, and set the camera
mode to [ ] or [
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
/ buttons, and press the SET button.
4. Select [Date/Time] with the
press the SET button.
5. Select the date format with the
and press the SET button.
Select the item's field with the
and adjust the value for the date and time with
the / buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the SET button.
6. To exit from the [Setup] menu, press the MENU
button.
EN-12
]; or press the 7 button.
/ buttons, and
/
/
buttons,
Off
buttons