Table of Contents
Advertisement
setup
Language
Select <LANGUAGE> and use the left/right
button to select a preferred display language.
FACTORy DEFAULTS
When selected, the <FACTORy DEFAULTS>
screen appears and you can reset all settings
to the factory default settings by selecting
the <OK>. However, the protocol, baud rate,
address and the language settings will not be
reset.
M
Note that the resetting the system to the
factory default will erase all settings data.
OSD COLOR
Selects the color of the on-screen display font.
PROPORTIONAL P/T
When selected <ON>, manual pan / tilt movement speed will vary proportionally to
the zoom ratio.
P/T SPEED
When selected <ON>, manual pan / tilt movement speed will be doubled.
_ setup
OTHER SET
LANGUAGE
FACTORY DEFAULTS
OSD COLOR
PROPORTIONAL P/T
P/T SPEED
AUTO CAL.
D-FLIP
PASSWORD
FACTORY DEFAULTS
OK
CANCEL
ENGLISH
BW
ON
[2]
OFF
OFF
OFF
Hide quick links:
Advertisement
Table of Contents
