Focus Mode; Zoom Speed; Display Zoom - Samsung SCP-2430 User Manual

FOCUS mODE

You can select a focus mode according to the
angle that you adjusted for camera recording.
- AF : This will monitor the screen continuously
to focus automatically. If you adjust the focus
manually, that will operate the same as in
<mF>. This will also restore focus after the
operation of pan/tile/zoom.
- SENSITIVITY : Indicates the sensitivity of auto
focus, which you can adjust between level 1
and level 7.
The closer your setting is to 7, the more
sensitively the auto focus function performs.
The Night setting is used when a strong light
reflects in a low contrast scene.
You can set it to OFF, LOW, MEDIUM, or
HIGH; set it to <HIGH> when there exist a
strong light such as street light.
- ONEAF : Restores focus after the operation
of pan/tile/zoom, and operates the same as
in <mF> unless the operation of pan/tile/
zoom is executed.
- MF : You can adjust the focus manually.
M
While you are working on the following objects, <AF> may not work properly.
If this is the case, use <MF> instead.
- Very bright object, or dominant object in a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects

ZOOm SPEED

You can adjust the zoom operation speed.

DISPLAy ZOOm

You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
DAY/NIGHT
WHITE BAL
FOCUS MODE
ZOOM SPEED
DISPLAY ZOOM
DISPLAY P/T
DIGITAL ZOOM
DETAIL
V-SYNC
AF
SENSITIVITY
NIGHT
English _1
AUTO
AF
[2]
OFF
OFF
X16
[2]
INT
[5]
MID