Table of Contents
Advertisement
3.
Select each item and set appropriately.
POSITION : Set the starting and ending
positions for the <AUTO PAN>.
Move to the setting screen and adjust
pan/tilt to the desired starting position,
and then press [ENTER].
Again, adjust pan/tilt to the desired
ending position and press [ENTER] to
finish <AUTO PAN> setup.
DIRECTION : Sets the direction of the camera's movement from the starting to
the end position. (Based on panning)
<RIGHT>
START
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TImE> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.
Pattern Setup
You can manually record your pan/tilt/zoom movements to a monitoring pattern for
up to 2 minutes.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
Select <mAIN mENU>-<AUTO SET>.
1.
2.
Select the pattern number.
PATTERN setup screen appears.
3.
Select the <POSITION> and set the
pattern's starting position and press
[ENTER].
END
AUTO PAN 1
POSITION
DIRECTION
ENDLESS
[10]
SPEED
DWELL TIME
<LEFT>
START
END
PATTERN SET 1
<POSITION>
START
English _
LEFT
OFF
3SEC
Hide quick links:
Advertisement
Table of Contents
