Recording And Parental Control Settings (Features) - Sony RDR-HX900 Operating Instructions Manual

Recording and Parental
Control Settings (Features)
The Features Setup allows you to adjust recording
and parental control settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Features," and press ENTER.
The Features Setup appears with the
following options. The default settings are
underlined.
SETUP
Settings TV Direct Rec :
Video Auto Chapter :
Audio TV Guide Page
Features Parental Control
Options One Touch Dubbing
Sychro Rec:
Easy Setup HQ Setting:
Colour System :
TV Direct Rec (HDD/DVD+RW/DVD-RW/
DVD+R/DVD-R only)
On
Allows you to easily record
what you are watching on the
TV using SMARTLINK.
Off Turns off the TV Direct Rec
function.
Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
Off
No chapter mark is inserted.
6Min Inserts chapter marks at
approximately 6-minute
intervals.
15Min
Inserts chapter marks at
approximately 15-minute
intervals.
On
6 Min
Record to HDD
HQ
PAL
Notes
• Depending upon the size of the recording being made,
the actual interval may vary from the interval selected
in "Auto Chapter." The selected interval should only be
used as an approximation to create chapters.
• This function is not available when dubbing DV tapes
to HDD and DVD-RWs (VR mode). Chapter marks are
automatically entered where the recordings start on the
tape (pages 79, 80).
TV Guide Page
Some broadcast systems ensure a Teletext
service* in which the complete programmes and
their data (title, date, channel, recording start time,
etc.) are stored day by day. A TV guide page
corresponds to each day of the week. When
recording a programme, the recorder
automatically takes the programme name from the
Teletext pages and stores it as the title name. The
TV guide page numbers depend entirely on the
broadcast itself and may be subject to change. If
so, you may have to set those TV guide page
numbers manually in the TV Guide Page menu.
* Not available in some areas.
1
After step 3 above, select "TV Guide Page"
and press , or ENTER.
The TV Guide Page menu appears.
2
Select the programme position for which you
want to set or change the TV guide page by
pressing PROG +/–.
• The TV guide page numbers (Example:
P301) appear automatically when the
recorder detects them.
Features-TV Guide Page
Sun P 301
Mon P 302
Tue P 303
Wed P 304
Thu P 305
Fri P 306
Sat P 307
• If no page numbers are detected (P000), you
have to set the appropriate TV guide page
number manually.
Features-TV Guide Page
Sun P 000
Mon P 000
Tue P 000
Wed P 000
Thu P 000
Fri P 000
Sat P 000
Prog. 4
Prog. 4
,continued 93