Sony RDR-HX900 Operating Instructions Manual page 44

If the timer settings overlap
Overlapped timer settings are shown as follows.
Timer
These timer settings overlap. Do you want to continue?
Fri 29.10 21:00-22:00
Fri 29.10 20:30-21:00
OK
To store the setting as shown, select "OK." The
programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
To cancel the overlapped setting, select "Cancel."
To confirm, change, or cancel timer recording
See "Checking/Changing/Cancelling Timer
Settings (Timer List)" (page 46).
To extend the recording duration time while
recording
1
Press TOOLS during recording.
The TOOLS menu appears.
2
Select "Extend Rec" and press ENTER.
Extend Rec. Time
Set the timer extend function.
Tue 28.9 10:00-11:30 AAB
Extend Time
3
Press M/m to select the duration time.
You can set the duration in increments of 10
minutes, for a maximum of 60 minutes.
4
Select "OK" and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you can
easily display the timer programming menu.
When the TV is turned on or in standby mode,
press [TIMER]. The recorder automatically turns
on and the TV's input is switched to the recorder.
The Timer programming menu appears.
z Hint
You can play the recorded programme by selecting the
programme title in the Title List menu.
44
AAB DVD SP PDC/VPS
DVD SP PDC/VPS
DEF
Cancel
OK
Cancel
DVD SP
Off
Notes
• If "The disc is full or nearly full" appears on the screen,
change the disc, or make available space for the
recording (HDD/DVD+RW/DVD-RW only)
(page 66).
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
To record a satellite programme, turn on the satellite
tuner and select the satellite programme you want to
record. Leave the satellite tuner turned on until the
recorder finishes recording. If you connect equipment
with a timer function, you can use the Synchro Rec
function (page 51).
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• The Rec Mode Adjust function only works with a timer
recording and the PDC/VPS function set to off. It does
not function with Quick Timer or Synchro Rec.
• The beginning of some recordings may not be made
when using the PDC/VPS function.
• You cannot extend the recording duration time when
"PDC/VPS" is set to "On."
Recording TV programmes using the
ShowView system
The ShowView system is a feature that simplifies
setting the timer. Just enter the ShowView number
listed in the TV programme guide. The date, time,
and channel of that programme are set
automatically.
Check that the channels are correctly set in
"Channel Setting" in Settings Setup (page 84).
" will