Sony RDR-HX900 Operating Instructions Manual page 97

HDD Bilingual Rec. (HDD only)
Selects the sound to be recorded on the HDD.
Main
Records the main sound for
the bilingual programme.
Sub Records the sub sound for
the bilingual programme.
Main+Sub Records the main and sub
sounds for the bilingual
programme.
Note
If you set the recording mode to be changed while
dubbing from a DVD to the HDD, the sound recorded in
the source (DVD) is applied regardless of this setting.
DVD Bilingual Rec. (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the recordable
disc. This setting is not necessary when recording
on DVD-RWs (VR mode) that record both the
main and sub sounds.
Main Records the main sound for
the bilingual programme.
Sub Records the sub sound for
the bilingual programme.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
Power
Low lighting. Turns off the
Save lighting when the power is
off.
Auto Display
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 21.
DVD1
Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD2 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD3
The default Command Mode
of the recorder.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1
After step 3 above, select "Factory Setup,"
and press , or ENTER.
The display for selecting a group of settings
appears.
2
Select the group of settings you want to return
to default from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their default
settings.
4
Press ENTER when "Finish" appears.
,continued 97