Recording And Parental Control Settings (Features); Disc And Remote Control Settings; Easy Setup (Resetting The Recorder) - Sony RDR-HX715 Service Manual

QQ
3 7 63 1515 0
Recording and Parental
Control Settings (Features)
The "Features" setup allows you to adjust
recording and parental control settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Features," and press ENTER.
The "Features" setup appears with the
following options. The default settings are
underlined.
SETUP
Settings Auto Chapter : On
Video Parental Control
One Touch Dubbing
Audio
Features Synchro Rec : Record to HDD
Options HQ Setting : HQ
Auto Title Erase : Off
Easy Setup Rec Mode Adjust : Off
Screen Saver :
On
Auto Chapter
Selects whether to automatically divide a
recording (a title) into chapters during recording
or dubbing.
On For the HDD or a DVD-RW (VR
mode), the recorder detects
changes in the picture and sound
and automatically inserts chapter
marks.
For other recordable discs, the
recorder inserts chapter marks at
approximately 6 minute intervals.
Off No chapter mark is inserted.
b
Notes
• The actual chapter mark interval may vary depending
on the amount of information contained in the video to
be recorded.
• Chapter marks are automatically inserted where the
recordings start on the tape when "Auto Chapter" is set
to "On" during DV dubbing to the HDD or a DVD-RW
(VR mode).
TE
L 13942296513
96
Disc and Remote Control
Settings/Factory Settings
(Options)
The "Options" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Options," and press ENTER.
The "Options" setup appears with the
following options. The default settings are
underlined.
SETUP
Settings Format DVD-RW : VR
Video Dimmer : Normal
Audio Auto Display : On
Features Auto Stereo : On
Options Tuner Audio : Main
Command Mode : DVD3
Easy Setup Factory Setup
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR Automatically formats the disc in
VR mode.
Video Automatically formats the disc in
Video mode.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
www
Power
Low lighting. Turns off the
Save lighting when the power is off.
.
98
http://www.xiaoyu163.com
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced
with different scenes.
1
Select "Parental Control" in "Features," and
press ENTER.
• If you have not entered a password, the
display for registering a new password
appears.
Features - Parental Control
Enter a new password.
OK
Cancel
• When you have already registered a
password, the display for entering the
password appears.
Features - Parental Control
Enter your password.
OK
Cancel
2
Enter your four-digit password using the
number buttons, then select "OK" and press
ENTER.
Features - Parental Control
Level : Off
Standard : USA
Password
3 Select "Standard," and press , or ENTER.
The selection items for "Standard" are
displayed.
Features - Parental Control
Level : Off
Standard : USA
USA
Password Others
4
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
• When you select "Others," press the number
buttons to select and enter an area code in
the table (page 116). Then select "OK" and
press ENTER.
Auto Display
On Automatically displays
information on the screen when
the recorder is turned on, etc.
Off Displays information only when
DISPLAY is pressed.
Auto Stereo
This function is effective only when "Tuner
Audio" is set to "Main."
On Receives stereo programs.
Normally select this.
Off Select this to reduce noise. The
sound changes to monaural.
Tuner Audio
Selects the sound to be recorded.
Main Records only the main sound.
SAP Records only the SAP (Second
Audio Program) sound.
b
Note
If no SAP sound is received, the main sound is recorded
regardless of the setting.
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 24.
DVD1 Select this if the default Command
Mode conflicts with other DVD
equipment.
DVD2 Select this if the default Command
Mode conflicts with other DVD
equipment.
DVD3 The default Command Mode of
the recorder.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
5
Select "Level," and press ENTER.
The selection items for "Level" are displayed.
Features - Parental Control
Level : Off
Standard : 8
Password 7
6
5
4
The lower the value, the stricter the limitation.
Discs rated higher than the selected level will
be restricted.
6
Select the level, and press ENTER.
The Parental Control setting is complete.
To cancel the Parental Control setting for the
disc, set "Level" to "Off" in step 6.
To change the password, select "Password" in
step 3, and press ENTER. When the display
for registering a password appears, enter a
new four-digit password using the number
buttons, then select "OK" and press ENTER.
b
Notes
• If you forget your password, you will have to reset it by
selecting "Parental Control" of "Factory Setup" in
"Options" setup (page 99).
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
One Touch Dubbing
Displays the following option for the One Touch
Dub function.
Finalize Disc (for all recordable discs except
DVD-RW in VR mode)
Selects whether or not to finalize the disc
automatically following One Touch Dubbing
(page 85).
Auto Automatically finalizes the disc
following One Touch Dubbing.
Manual Allows you to finalize the disc
manually.
Q Q
3 6 7 1 3
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1
Select "Factory Setup" in "Options," and
press , or ENTER.
The display for selecting a group of settings
appears.
2
Select the group of settings you want to return
to default from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their default
settings.
4
Press ENTER when "Finish" appears.
.
1-24
9 4 2 8
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 56).
Record to
Records to the HDD.
HDD
Record to Records to DVDs.
DVD
HQ Setting (HDD only)
Selects the HQ mode used for recording on the
HDD (page 49).
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ mode.
Auto Title Erase (HDD only)
On Automatically erases old
titles recorded on the HDD
(page 51).
Off
Turns off the function.
Rec Mode Adjust
On
Automatically adjusts the
recording mode to enable the
entire program to be
recorded (page 51).
Off Turns off the function.
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
On Turns on the screen saver function.
Off Turns off the function.
1 5 0 5 8 2 9 9 4
Easy Setup
(Resetting the Recorder)
Select this to run the "Easy Setup" program.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Easy Setup," and press ENTER.
SETUP
Settings
Video
Audio
Features
Options
Easy Setup
Easy Setup
4
Press ENTER.
5
Select "Start."
6
Follow the instructions for "Easy Setup"
(page 25) from step 2.
m
co
9 9
2 8 9 9
97
99