Active Toolbar; After Capturing An Image - Nokia 5630 User Manual

Nokia 5630
Hide thumbs Also See for 5630:
Table of Contents

Advertisement

Active toolbar

The active toolbar provides you with shortcuts to different
items and settings before capturing an image or recording
a video. Scroll to icons, and select them by pressing the
scroll key.
If you want the active toolbar to be visible before and after
capturing an image or recording a video, select
Show
toolbar. To view the active toolbar only for 5
seconds when pressing the scroll key, select
Hide
toolbar.
In the active toolbar, select from the following:
Switch to video mode
— to switch between the video and image modes
Scene modes
— to select the scene
Flash mode
— to select the flash mode (images only).
To activate the red-eye reduction, select Red-eye. Avoid
capturing image or zoom in very close to the object. The
red-eye reduction may not be shown until the image is
saved in the Gallery.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
Self timer
— to activate the self-timer (main camera
only). Select the self-timer delay, and to activate the self-
timer, select Activate.
Options
Options
>
(
Switch to image
mode)
Sequence mode
(images only). See
"Capture images in sequence",
Go to Gallery
— to open Gallery
To use panorama mode, select
indicates panorama mode. Press the camera key to
start capturing a panorama image. Turn slowly to the right
or left. You cannot change the direction. To stop the
>
panorama, press the camera key again. This option is
available only for the main camera.
To customise the toolbar, select
toolbar. You can remove an item from the toolbar, or
change, add, or move items.
The available options vary depending on the capture mode
and view you are in.
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the colour and lighting settings
are replaced by the selected scene. See
can change the setup settings after selecting a scene if
needed.

After capturing an image

After you capture an image, select the following from the
active toolbar (available only if
set to
On
in still image camera settings):
— to activate the sequence mode
Options
>
Panorama
Options
>
Customise
"Scenes",
Show captured image
Copyright © 2009 Nokia. All rights reserved.
C a m e r a
p. 56.
mode.
p. 56. You
is
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents