Advertisement
1
A
1A.
Remove all of the contents from inside the carton and place them on a clean flat surface. Check all the
contents against the parts list on page1. Check the contents also for damage.
1B.
Set the wheels to the side and remove the black plastic protective caps from the ends of the axles.
Remove the rain canopy and flag pole assembly from inside the trailer.
STEP 2 Assemble the canopy frame
2A
2A.
Lift the left side panel with the frame joiner housing upward so that the right side panel is visible.
Lift the right side panel to expose the crossbar and slide the crossbar through the sling seat.
Locate the end of the crossbar into the joiner housing on the left panel.
2B.
Insert the quick release safety pin through the end of the cross bar & joiner housing and snap closed.
2C.
Insert the quick release safety pins through the front and rear of each panel at the base and snap closed to
secure the sides.
WARNING Ensure all 5 quick release safety pins are securely locked before continuing!
ASSEMBLY INSTRUCTIONS
2B
Q/R safety pin
1
B
2C
Q/R safety pin
Advertisement
