Assembly - Halfords Bike Trailer Owner's Manual

ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 1 - Remove the trailer from the carton and check the contents against the parts list
Fig 1
WARNING
Immediately discard all plastic bags and plastic wrapping materials!
IMPORTANT! Do not remove the white foam from the wheel axles until STEP 4.
STEP 2 - Open Frame
Fig 2
Fig 2c
Remove trailer and all components from carton. Unfold trailer by pulling the frame and remove all components
from inside. Note that the window tubes are made in two pieces (marked R and L), and are connected by a
spring pin located in the rear half of the window frame tubes. To assemble, slide the fabric sleeve forward to
7
Fig 2a
Fig 3
Fig 1a
Fig 2b
Fig 4