How To Change The Network Password - Hercules ePlug 200 C Manual

Hercules ePlug 200 C

2.5. How to change the network password

When you install a HomePlug network, a random password is automatically generated. You can easily
generate a new random password by using the Connect button's restart function.
If you change the network password on an adapter, that adapter will no longer be part of the
network.
- Press for more than 10 seconds (ePlug 200 C
version) or between
(ePlug 200 Multi version) on the Connect button on
the adapter whose password you want to change.
- Wait until the adapter restarts.
- Connect the other adapters by pressing for
between 2 to 4 seconds on the Connect button on
the adapter which is already part of the network you
wish to create, and then pressing the Connect
button on the adapter you wish to integrate into that
network.
- Repeat this procedure for all adapters you wish to
integrate into the network.
Hercules ePlug 200 Multi
8 and 12 seconds
User Manual – 19/75