Table of Contents
Advertisement
4,
Remove
trim ring from outer
window
assembly
A
Using a Phillips screwdriver, remove the 6 screws from the
outer window retainer and rotate the outer window assembly
clockwise until the square notches line up with the 4 tabs
on the trim ring indicated with arrows in the figure A above.
Then lift the outer window retainer up and off the trim ring
and set aside (B).
5. Reverse outer window/handle
6.
Rotate
and reassemble
outer door
and trim ring
A
B
Align the notches on the outer door assembly with the tabs on
the trim ring and lower into place as shown in figure A.
Rotate the outer door assembly counterclockwise
to lock tabs
into place (figure B). Using a Phillips screwdriver, secure with
6 screws removed earlier.
IMPORTANT:
Do not overtighten.
Rotate the outer window 180 °.
2O
Advertisement
Table of Contents
