Care And Maintenance - Britax Marathon User Manual

Care and Maintenance

Cover Removal
1 Loosen the harness by lifting the harness adjuster lever while pulling
the shoulder straps forward as far as possible .
2 Unhook the shoulder straps from the yoke on the rear of child
restraint .
3 Remove the belly pad from the buckle .
4 Pull upper harness straps through the shell and cover, to the front
of the restraint .
5 Gently remove the upper portion of the cover . Be careful not to
damage the energy absorbing foam .
6 Pull the lower harness straps, buckle tongues, chest clip, and buckle
through the slots in the cover .
WARNING:
• Do not take apart or attempt to take apart the harness . It is
unnecessary and dangerous to do so .
• Never remove the buckle tongues from the harness . They
cannot be reattached after removal .
7 Remove the entire cover from the restraint .
Refitting the Cover
To refit the cover, reverse Cover Removal directions . Make sure that
the shoulder straps are threaded through the chest clips and that
the harness is not twisted .
32