HP xw4200 Specifications page 50

QuickSpecs
Technical Specifications - Optical Devices
Access Times
(typical reads, including
settling)
Power
Audio Output
Configuration Jumper
Block
Data Interface Connector 40-pin, shrouded and keyed, flat ribbon
Operating Conditions
(all conditions non-
condensing)
Certifications, Approvals MMC-3 support, multi-read compliant, Microsoft WHQL certification, ACA
DA - 12022 Canada — Version 25 — August 15, 2005
Write Methods
Random DVD
Random CD
Full Stroke DVD
Full Stroke CD
Startup Time (single)
Startup Time (multi-
session)
Stop Time (typical)
Cache Buffer
Data Transfer Modes
Source
DC Power Requirement
DC Current
Total Drive Power
(standby mode)
Line-Out
Signal-to-Noise Ratio
Channel Separation
Master, slave, and cable select modes
Temperature
Relative humidity
Maximum wet bulb
temperature
AS/NZS 3548 class B, BSMI CNS 13438, CE Mark, C.I.S.P.R. Pub 22, TUV or VDE
EN60950, EN 55022, EN55024, EMKO EN60950, EN 60825-1, UL 60950, CSA
C22.2 60950-2000, CFR 21 part 1040 class 1, CFR 47 C.I.S.P.R. Pub 22 Class B,
DHHS/FDA, ANSI C63.4-1992 (FCC Class B)
HP xw4200 Workstation
CD Formats: CD-DA, CD-ROM (Mode 1 and 2), CD-
XA (Mode 2, Form 1 and 2), Photo CD (Single and
Multi-session), Mixed Mode (Audio and Data
combined), CD-I (Mode 2, Form 1 and 2, and CD-I
Ready), CD-Extra, CD-Bridge, Video CD
Disc-at-once, session-at-once, track-at-once,
incremental fixed and variable packet, multi-
session
< 140 ms
< 125 ms, (typical)
< 250 ms
< 210 ms
< 7 seconds (typical)
< 30 seconds (typical)
< 4 s
2 MB (minimum)
ATA PIO mode 4 (16.7 MB/s); ATA Multi-word DMA
mode 2 (16.7 MB/s); ATA UltraDMA Mode 3 (44
Mbytes/s)
Four-pin, DC power receptacle
5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
5 VDC (< 1000 mA typical, < 1600 mA maximum)
12 VDC (< 600 mA typical, < 1400 mA maximum)
< 2.5 Watt
0.7 VRMS
74 dB
65 dB
41° to 122° F (5° to 50° C)
10% to 90%
86° F (30° C)
Page 50