Technical Specifications - Optical Devices - HP xw4200 Specifications

QuickSpecs

Technical Specifications - Optical Devices

48X CD-ROM Drive Form Factor
Mounting Orientation
Interface
Dimensions (HxWxD)
Weight
Data Transfer Rates -
Read
Media and Formats - Read CD Media
Access Times
(typical reads, including
settling)
Power
Audio Output
Configuration Jumper
Block
Operating Conditions
(all conditions non-
condensing)
DA - 12022 Canada — Version 25 — August 15, 2005
5.25-in, half-height, tray load
Horizontal or vertical
ATAPI/EIDE
1.63 x 5.83 x 7.27 in (4.13 x 14.6 x 18.5 cm)
1.76 lb (0.8 kg)
Digital audio extraction (minimum) – 1,200 KB/s (8X)
CD read – up to 7,200 KB/s (48X)
CD Capacities
CD Formats
CD-ROM Mode 1
Full Stroke CD
Start-up Time (typical)
Stop Time (typical)
Write Buffer Size
Data Transfer Modes
Source
DC Power Requirement
DC Current
Total Drive Power
(standby mode)
Line-Out
Signal-to-Noise Ratio
Channel Separation
Master, slave, and cable select modes
Temperature
Humidity
HP xw4200 Workstation
stamped, CD-R, CD-RW (LS, HS, US)
180 MB (mode 2, 8 cm); 540 MB (mode 1, 12 cm);
650 MB (mode 2, 12 cm); 700 MB (Mode 2, 12 cm,
80-minute)
CD-DA, CD-ROM (Mode 1 and 2), CD-XA (Mode 2,
Form 1 and 2), Photo CD (Single and Multi-
session), Mixed Mode (Audio and Data combined),
CD-I (Mode 2, Form 1 and 2, and CD-I Ready), CD-
Extra, CD-Bridge, Video CD
< 125 ms
< 210 ms
< 7 s (single session), < 30 s (multi-session)
< 4 s
128 KB (minimum)
PIO Mode 4 (16.6 MB/s); Multi-word DMA mode 2
(16.6 MB/s); UltraDMA Mode 0 (16.7 MB/s);
UltraDMA Mode 2 (33.3 MB/s)
Four-pin, DC power receptacle
5 VDC ± 5% - 100 mV ripple p-p
12 VDC ± 5% - 200 mV ripple p-p
5 VDC - <1000 mA typical,
< 1600 mA maximum
12 VDC - < 600 mA typical,
<1400 mA maximum
< 2.5 Watt
0.7 VRMS
74 dB
65 dB
41° to 122° F (5° to 50° C)
10% to 80%
Page 45