Whirlpool GR450LXLS0 Installation Instructions Manual page 9

Check operation
7[] Check the operation of the
cooktop elements:
Push in and turn each surface unit control
knob to "Hi" position. Check the
operation of the cooktop elements and
O O FRONT OFF
@O
kO
3
/
4/5\6
HI
8
7
[] Check the operation of the oven:
SFLF-CLFANING OVFN
CONVECTION
BAKE BROIL
©
BAKE
I2
0
AUTO
CLEAN
COGTOM COOK
BROIL TIME
©
DELAY
START
START
TIME
©
TIMER
GET
&
NR
©
TIMER
OFF
©
OVEN
CLOCK LIGHT
@
Bake Broil Clean
Dela_ Door Controls
Locked Locked
START
ENTER
_SSE¢
OFF
SELF-CLEANING OVEN
1. Press the "BAKE" pad.
• Depending on model, the "BAKE"
and "TEMP" indicators will light and
"350" will appear in the display or,
the "BAKE" indicator will light and
"350" will appear in the display.
•The "START" indicator will begin
flashing after 5 seconds.
2. Press the START/ENTERpad.
,The "ON" indicator will light.
,The "TEMP" indicator will turn off.
,The display will show the automatic
countdown time needed to preheat
the oven to the selected temperature
("350") and begin counting down.
,The bottom element should glow red.
,The upper element should become
hot, but not glow red.
3. Press the "OFF/CANCEL' pad.
Note:The oven wiil not go through
preheat if the oven temperature is above
170° E; instead, the "TEMP" indicator will
light and the selected temperature will
appear in the display.
4. Press the "CUSTOM BROIL' pad.
, Depending on model, the "BROIL'
and "TEMP" indicators wiil light and
"500" will appear in the display or,
the "BROIL' indicator wiil light and
"500" wiil appear in the display.
•The "START" indicator wiil begin
flashing after 5 seconds.
5. Press the "START/ENTER" pad.
•The "ON" indicator wiil light.
•The upper element wiil glow red.
6. Press the "OFF/CANCEC pad.