Mercedes-Benz COMAND Operator's Manual page 41

Ending Scan search manually
Press the Scan soft key again.
Manual tuning
Switch to the desired waveband
( page 37).
Press and hold or
least 2 seconds to tune up or down.
Manual tuning is activated.
Keep the button pressed or release it
and keep tapping
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.
i
Manual tuning is also possible in all
wavebands by pressing
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
for at
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
Tuning via direct frequency input
or in
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
( page 37).
Press
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
or .
Audio
Radio operation
.
41