Setting Map Orientation - Mercedes-Benz COMAND Operator's Manual

Navigation*
During route guidance
Personal option:
The symbols to be displayed can be
selected from a list ( page 144).
None option:
No symbols will be displayed on the
map.
i
The Change soft key is only available if
the Personal option is selected. Other-
wise, it will appear shaded out.
Setting personal symbol display
After activating the Personal
press the Change soft key.
The list of available symbols will
appear.
i
Empty square = symbol deactivated
Solid square = symbol activated
Any number of symbols can be activat-
ed.
144
Use or
Press to activate or deactivate the
symbol depending on its previous
state.
Finally, press the
for the screen to change.
The setting is stored.

Setting map orientation

One of the following orientations can be
selected:
2D North up
Fixed map orientation, north is always
option,
pointing up,
2D Heading up
Dynamic map orientation, driving direc-
tion is always pointing up.
In the Display menu ( page 143),
press the View
Both options appear.
to select a list entry.
Back soft key or wait
Changing map orientation
soft key.
i
Empty circle = deactivated
Solid circle = activated
Use or to select the deactivat-
ed option.
Press .
The orientation changes.
Finally, press the Back soft key or wait
for the screen to change.