HP SL160z Overview page 4

QuickSpecs
Standard Features
Storage Controller Storage Controller Storage Controller Storage Controller
Internal Storage Devices Internal Storage Devices Internal Storage Devices Internal Storage Devices
Maximum Internal Maximum Internal Maximum Internal Maximum Internal
Storage Storage Storage Storage
Interfaces Interfaces Interfaces Interfaces
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10)
NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To NOTE: NOTE: NOTE:
enable use of the B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be
found in the advanced section of the RBSU. For additional details
NOTE: NOTE: NOTE: NOTE: Transfer rate: 3.0 Gb/s SATA
NOTE: A HP Smart Array controller is required for SAS Hard Drives NOTE: NOTE: NOTE:
NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is NOTE: NOTE: NOTE:
needed to install storage controller drivers during a Windows operating system installation from a CD.
Diskette Drives
Optical Drives
Hard Drives
Drive Bays
Non-Hot Plug SATA 3.5"
Non-Hot Plug SATA 2.5"
Non-Hot Plug SAS 3.5"
Non-Hot Plug SAS 2.5"
Non-Hot Plug SSD 2.5"
Serial
Parallel
Network RJ-45
Keyboard
Pointing Device (Mouse)
Graphics
Management
Health LED
Power
UID
USB
DA - 13385 North America — Version 18 — February 13, 2012
HP ProLiant SL160z Generation 6 (G6) HP ProLiant SL160z Generation 6 (G6) HP ProLiant SL160z Generation 6 (G6) HP ProLiant SL160z Generation 6 (G6)
Via USB only
DVD-ROM / DVD RW drives via USB only
NOTE: External support only. NOTE:
NOTE: NOTE:
None standard
Up to 2 Non-hot plug SATA or SAS 3.5" drives
Up to 4 Non-hot plug SATA, SAS, or SSD 2.5" drives (requires SFF drive
cage)
4.0TB
2.0TB
4.0TB
2.4TB
480GB
1
None
2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP
ProLiant Lights Out 100i Remote Management)
0 (via USB only)
0 (via USB only)
1
1 Optional Dedicated LO100i Management Port
1 front per server node
1 front per server node
1 front per server node
3 (two front, one internal)
NOTE: NOTE: NOTE: NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (536769-B21)
www.hp.com/go/SATARAID
2 x 2TB
4 x 500GB
2 x 2TB
4 x 600GB
4 x 120GB
Page 4