HP SL160z Overview page 26

Hp proliant generation 6 (g6)

Hide thumbs Also See for SL160z:

Configuration manual (11 pages)

Specification (33 pages)

Table of Contents

QuickSpecs

Additional Options

HP SL Advanced Power

Manager

HP Rack Series

NOTE: The SL Advanced Power Manager is an optional rack level solution for the HP

NOTE:

ProLiant SL6000 which enables server-level DC (or hardware) power on and off and

server-level monitoring. In addition, the SL APM will automatically discover SL

hardware components which are connected into the SL APM solution.

NOTE: The SL APM does not replace rack PDUs, but is designed to enable the

NOTE:

utilization of basic, low cost, rack PDUs while providing the functionality of 'switched'

PDUs which provide hardware power on/off of individual servers by turning off the AC

power to the power supplies of a given server. Because the SL servers share power

supplies to optimize power efficiency, using 'switched' PDUs to turn off the power

supplies in the chassis will result in the loss of all servers in that chassis. The SL APM

solves this by allowing server-level hardware power on/off of the DC power to the

individual server motherboards.

HP SL Advanced Power Manager Kit

HP SL RJ45 Advanced Power Manager Option Module Kit

NOTE:

NOTE: 1 per SL APM Distribution module.

NOTE:

NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and

NOTE:

Management page. Under Power Cords, click on the "HP Power Cord Matrix" link.

That link will list cable descriptions, requirements, and specifications for UPS and PDU

units. Please see the following link: www.hp.com/products/powercords.

HP Rack 10000 G2 Series

HP Rack 10000 G2 Series (Carbon/Graphite Metallic)

HP Rack 10000 G2 Series

HP 10642 G2 Pallet Universal Rack

HP 10642 G2 Shock Universal Rack

HP 10642 G2 1200mm deep Shock Rack

HP 10647 G2 1200mm deep Shock Rack

NOTE:

NOTE: It is mandatory to use a shock pallet when shipping racks with equipment

NOTE:

installed.

NOTE:

NOTE: HP ProLiant SL160z G6 models have two different rail kits to choose from:

NOTE:

10U bulk rail kit - Used to fit in HP 10000 series racks

One 10U bulk rail kit will hold up to five z6000 chassis, thus ten SL160z

G6 servers

2U rail kit - Used to fit in 3rd party racks or to sell one z6000 chassis at a time

One 2U rail kit will hold one z6000 chassis, thus two SL160z servers

NOTE:

NOTE: Please see the QuickSpecs for Technical Specifications and additional

information:

http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html

NOTE:

NOTE: For additional information regarding Rack Cabinets, please see the following

NOTE:

URL: http://www.hp.com/go/rackandpower.

NOTE: The increasing power of new high-performance processor technology requires

NOTE:

increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks

provide enhanced airflow for maximum cooling, allowing these racks to be fully

loaded with servers using the latest processors.

CAUTION:

CAUTION: If a third-party rack is used, observe the following additional requirements

CAUTION:

to ensure adequate airflow and to prevent damage to the equipment: Front and rear

doors: If your 42U server rack includes closing front and rear doors, you must allow

830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to

DA - 13385

North America — Version 18 — February 13, 2012

HP ProLiant SL160z Generation 6 (G6)

538084-B21

580212-B21

AF001A

AF002A

AF092A

AF094A

Page 26

Table of Contents

This manual is also suitable for:

Proliant sl160z g6

HP SL160z Overview page 26

Related Manuals for HP SL160z

Related Products for HP SL160z

This manual is also suitable for:

Table of Contents