Comtrend Corporation VG-8050 User Manual page 31

LAN IPv6 Link-Local Address Configuration
Heading Description
EUI-64 Use EUI-64 algorithm to calculate link-local address from MAC
address
User Setting Use the Interface Identifier field to define a link-local address
Static LAN IPv6 Address Configuration
Heading
Interface Address
(prefix length is
required):
IPv6 LAN Applications
Heading
Stateless
Refresh Time (sec):
Stateful
Start interface ID:
End interface ID:
Leased Time (Second):
Heading
Enable RADVD
RA interval Min(sec):
RA interval Max(sec):
Reachable Time(ms):
Default Preference:
MTU (bytes):
Enable Prefix Length Relay
Enable ULA Prefix Advertisement
Enable MLD Snooping
Standard Mode
Blocking Mode
Description
Configure static LAN IPv6 address and subnet prefix
length
Description
Use stateless configuration
The information refresh time option specifies
how long a client should wait before refreshing
information retrieved from DHCPv6
Use stateful configuration
Start of interface ID to be assigned to dhcpv6
client
End of interface ID to be assigned to dhcpv6
client
Lease time for dhcpv6 client to use the assigned
IP address
Description
Enable use of router advertisement daemon
Minimum time to send router advertisement
Maximum time to send router advertisement
The time, in milliseconds that a neighbor is
reachable after receiving reachability
confirmation
Preference level associated with the default
router
MTU value used in router advertisement
messages to insure that all nodes on a link use
the same MTU value
Use prefix length receive from WAN interface
It is to enable announcing the unique local
address.
Enable/disable IPv6 multicast forward to LAN
ports
Forwarding un-known multicast to all ports
Blocking un-known multicast to all ports
30