Honda Remote Engine Start System II User's Information Manual page 28

Automatic Defrost Function
Checking the current setting of the automatic defrost function
1. Press and hold the engine/command button on the
transmitter, then holding the unlock/stop button.
UNLOCK/STOP
BUTTON
2. In 5 seconds, a beep sounds and the A/C
cooperative operation in setup start indicator is
shown on the display.
Indicates that the setup is started
28
ENGINE/
COMMAND
BUTTON
B127060H
Blinking
B127690H
3. After 5 seconds, a beep sounds and the current
status displays.
Blinking
Blinking
NOTE: Please pay attention because the setting
changes when more than 10 seconds pass after pushing
the engine/command button and the unlock/stop button
on the transmitter.
© 2012 American Honda Motor Co., Inc. - All Rights Reserved.
Automatic
defrost
function ON
Automatic
defrost
function OFF
B127740H