Table of Contents
Advertisement
provide adequate protection.
Clean safety belts only with mild
soap and lukewarm water.
If a floor mat is the wrong size or
is not properly installed, it can
interfere with the pedals.
Interference with the pedals can
cause unintended acceleration
and/or increased stopping
distance which can cause a crash
and injury. Make sure the floor
mat does not interfere with the
pedals.
Use the following guidelines for
proper floor mat usage.
The original equipment floor
mats were designed for your
vehicle. If the floor mats need
replacing, it is recommended
that GM certified floor mats be
purchased. Non-GM floor mats
may not fit properly and may
interfere with the accelerator or
brake pedal. Always check that
the floor mats do not interfere
with the pedals.
Use the floor mat with the
correct side up. Do not turn
it over.
Do not place anything on top of
the driver side floor mat.
Use only a single floor mat on
the driver side.
Do not place one floor mat on
top of another.
Some vehicles have floor mats with
a button-type retainer.
1. Pull up on the rear of the mat to
unlock and remove.
2. Reinstall the floor mat by lining
up the floor mat openings over
the carpet retainers and
snapping into position.
Advertisement
Table of Contents
