Table of Contents
Advertisement
Remote Keyless Entry
(RKE) System Operation
The Remote Keyless Entry (RKE)
transmitter functions work up to
60 m (195 ft) away from the vehicle.
Other conditions can affect the
performance of the transmitter. See
Remote Keyless Entry (RKE)
System on page 2-2.
With Remote Start and Power
Liftgate Shown, Without Similar
(Remote Vehicle Start): For
vehicles with this feature, see
Remote Vehicle Start on page 2-4.
(Lock): Press to lock all the
doors.
If enabled through the Driver
Information Center (DIC), the
parking lamps flash once to indicate
locking has occurred. If enabled
through the DIC, the horn sounds
when
is pressed again within
five seconds. See Vehicle
Personalization on page 5-44.
Pressing
may arm the content
theft-deterrent system. See Vehicle
Alarm System on page 2-12.
(Unlock): Press once to unlock
only the driver door. If
again within five seconds, all
remaining doors unlock. The interior
lamps come on and stay on for
20 seconds or until the ignition is
turned on.
If enabled through the DIC, the
parking lamps flash twice to indicate
unlocking has occurred. See Vehicle
Personalization on page 5-44.
Keys, Doors, and Windows
Pressing
disarms the content theft-deterrent
system. See Vehicle Alarm System
on page 2-12.
(Power Liftgate): Press and
hold until the liftgate begins to move
to open or close the liftgate. The
taillamps flash and a chime sounds
to indicate when the liftgate is
opening or closing.
(Vehicle Locator/Panic
Alarm): Press and release to
locate the vehicle. The parking
lamps flash and the horn sounds
three times.
is pressed
Press and hold
two seconds to activate the panic
alarm. The parking lamps flash and
the horn sounds repeatedly for
30 seconds. The alarm turns off
when the ignition is moved to
ON/RUN or
The ignition must be in LOCK/OFF
for the panic alarm to work.
2-3
on the RKE transmitter
for more than
is pressed again.
Advertisement
Table of Contents
