3. Pull up on the release lever on
the back of the seat.
4. Push the seatback forward to
lay flat.
See Third Row Seats on page 3-11.
If equipped, the buttons are on the
center console. To operate, the
engine must be running.
If equipped, press to heat the
seatback only.
If equipped, press to cool the
entire seat.
Press to heat the seat and
seatback.
Press the button once for the
highest setting. With each press of
the button, the seat will change to
the next lower setting, and then to
the off setting. The lights indicate
three for the highest setting and one
for the lowest.
See Heated and Cooled Front Seats
on page 3-8.
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints on page 3-2
and Seat Adjustment on page 3-3.