Advertisement
OPTIONAL:Cmllking andinstallation o f tfimoninterior
wallmay bedone. Youcanbuywood Iiomyourlocal l umber
orhardware supply. Ontheoutside, caulk openings around top
and sides of cabinet, andallsides o f wood sleeve t otheopening.
NOTE: See Step 7,Item3of Window Mounting Instructions
lot bottom railseal location.
Masen
Construction
1. Cut or build a wall opening in the in,f_sonFyvcall $11Y1i1,5_1
to the fiame constmction(reler
to Step 2 of Thin=the=Wall
Installation
lot a wall thicM3ess greater than 8=1/2").
2. Secure cabinet in place using masom-y nails, or the fight
masom 7 anchor screws.(ka_other way to do this is to Nlild
an m °between fiame of 2x4 's as shown m the Step 2 Prepare
Wall illustrations=Nit make it double flmned on either side,
and install between masom-y wall opening and cabinet.
Frame must be securely anchored to masom-y wall opening)
This way gives ve_3/good louver cle_a_mceon either side of cabinet.
3. Install a lh_ted to support masom_y wall above cabinet.
Existing holes in cabinet can be used and/or additions holes
can be drilled to li_sten cabinet at various positions.Be sure
that side louver clearance is m accordance with Step 1above.
4. Install extefior cabient suppport brackets as shown m
Step 2 of Tknal=the=Wall Installation.Caulk
or flash if
neede, to provide a wether=tight seal around top and sides
of cabinet.
5. To complete installation, apply wood trhn molding
around room side projection of cabinet.
Advertisement
